Agip Greasse SM

Description

The extremely pure, finely-divided molybdenum disulphide used in AGIP GREASE SM is a very good solid lubricant which adheres firmly to the surfaces concerned, filling the micro-cavities and forming a film which can perform all the necessary lubrication functions in case the grease component happens to be removed as a result of mechanical loads or thermal stresses or for other reasons. The presence of molybdenum disulphide  guarantees stand-by lubrication when regreasing is impossible or if this operation happens to be delayed. It also allows long relubrication intervals due to the good stability of the grease.

Agip Grease LP

Description

The presence of EP (Extreme Pressure) additives provides a lubricating film that will with stand the mechanical stresses which occur in heavily loaded sliding bearings. Their very good oxidation resistance ensures a long service life even at high temperatures. Their good water-washout properties (typical value of GREASE LP 2 at 175  F is 1.5%) and adhesion permit their use even in the presence of water. They provide rust protection and are noncorrosive to copper and copper alloys. The greases are pumpable, so they can be used in centralized lubrication systems.

Agip Grease MU EP

Spesification
	AGIP GREASE MU meet the following classifications: GREASE MU                 0                              1                             2                           3 ISO                        L-X-BCHB 0                L-X-BCHB 1                L-X-BCHB 2               L-X-BCHB 3 DIN 51 825            KP0K -20                     KP1K -20                    KP2K -20                 KP3K -20 DIN 51 826               G0K                            G1K
	Description
	The presence of EP (Extreme Pressure) additives ensures that AGIP GREASE MU EP greases form a tenaciously adhering lubricating film which resists displacement even when subjected to heavy pulsating loads, thus preventing metal-to-metal contact of the lubricated surfaces. The multipurpose characteristics of AGIP GREASE MU EP greases facilitate lubrication planning and reduce the range of stocks to be held. Their good physical and chemical stability ensures that these greases remain unaltered even after long exposure to high mechanical loads and  thermal stresses, while their outstanding oxidation resistance inhibits deterioration both during storage and use. Their high dropping point allows the products to be used over a wide range of temperatures. They ensure effective rust-protection even where the most delicate metals are concerned, and they adhere extremely well to metal surfaces resisting displacement by vibrations. AGIP GREASE MU EP greases are water-resistant and can be used in moist conditions and in contact with water, while good pumpability facilitates dispensing even at low temperatures.

Agip Grease MU 00

Spesification
	AGIP GR MU 00 has been homologated by Italian Rail in "Category 002/188" (lithium grease for wheel-flange lubrication).
	Description
	The high mechanical and chemical stability of the product ensures that its properties remain unaltered even after  long exposure to intense mechanical loads and thermal stresses. Its outstanding resistance to oxidation inhibits deterioration both during storage and use, while its high dropping point allows the product to be used effectively over a wide range of temperatures. AGIP GR MU 00 grease adheres tenaciously to the surfaces to which it is applied, resisting the dislodging effect of vibrations. It is also water-resistant, so it can be used in wet environments and in contact with water. The multipurpose characteristics of AGIP GR MU 00 permit rationalization of stocks, since a variety of components can be lubricated with a single semifluid grease.

Agip Grease MU

Spesification
	GREASE MU 0 ISO               : L-X-BCHA 0 DIN 51 825 : K0K -20 GREASE MU 1 ISO               : L-X-BCHA 1 DIN 51 825 : K1K -20 GREASE MU 2 ISO               : L-X-BCHA 2 L-X-BCHA 3 DIN 51 825 : K2K -20 K3K -20 GREASE MU 3 ISO               : L-X-BCHA 3 DIN 51 825 : K3K -20http://agipoil.co.id/Admin/edit_competitor_product.aspx?ID=1957
	Description
	AGIP GREASE MU greases have been developed for use in all applications where specific EP (Extreme Pressure) properties are not required. They are suitable for plain bearings, ball and roller bearings, swivels, joints, couplings and other parts of all types of industrial, construction, agricultural machinery etc.